PU NEWSLETTER
 
 
 
Issue 270 - February 24, 2010
  Personal Information Company Information Product Information Selling Opportunities Request for Assistance
 
WHAT'S NEW IN THE PU COMMUNITY
         
 
Liquid urethane polymers improve performance of epoxy resins
Options for flexiblizing epoxy resins have traditionally been limited. The addition of plasticizers, for example, has generally had an adverse effect on the epoxy’s mechanical properties. Now, however, there is another viable alternative: ...

Company: Bayer MaterialScience
Innovative Polymers Introduces Family of Super Tough, Shore A Hardness ...
A series of High Performance polyurethanes formulated for producing durable parts with extremely high elongation (356 – 800%) and tear strengths (130 – 325 pli) was introduced today by Innovative Polymers, Inc. The Shore A hardness elastomers ...

Company: Innovative Polymers
CPI Accepting Papers And Posters For The Polyurethanes 2010 Technical ...
The Center for the Polyurethanes Industry (CPI), of the American Chemistry Council, has issued a call for papers and posters to be presented at the Polyurethanes 2010 Technical Conference. In partnership with UTECH North America, the ...

Company: The Center for the Polyurethanes Industry
Polyurea Status Report now available in English
PDA Europe now issued the English edition of the status report jointly worked out with Deutsche Bauchemie e.V. (German Association of Construction Chemicals Manufacturers). This status report for the first time is highlighting the present ...

Company: The Polyurea Development Association Europe
Low Pressure Elastomer Equipment - ESCO (Edge-Sweets Company)
Submerged pumps are used when the curative is solid at room temperature. Fully computer controlled multi-component low pressure elastomer machines are available from ESCO Company. These machines are designed to the customers exact process ...

Company: Edge Sweets Company
Zwaluw Polyurethane-15 LM - Den Braven Sealants
Zwaluw Polyurethane-15 LM is a durable water-, air- and weather resistant high elastic sealant based on polyurethanes that stays elastic under different climatic circumstances. Excellent adhesion to most surfaces and very well paintable with ...

Company: Den Braven Sealants
Cray Valley USA, LLC
OVERVIEWCray Valley manufactures and markets Poly bd® and Krasol® resins. They are liquid, hydroxyl-terminated homopolymers of butadienes. The unique structure of the resins provides properties which surpass conventional polyether and ...

Company: Sartomer
Continuous production of PU foam-insulated pipes in one system
KraussMaffei Berstorff is now offering complete systems for continuous production of PU-insulated pipes. The extruded plastic pipe is given an insulating polyurethane layer, followed immediately by the addition of a protective polyethylene sheath.The pipe – made of ...

Company: KraussMaffei Berstorff
 
 
Purac joins BE-Basic consortium for bio-based economy
Purac, a CSM company, signed on 18 February 2010 a research contract to participate in the research program of BE-Basic; a consortium of international knowledge institutes, the Dutch government, global industry and ...
Stepan achieves ISO 14001 accreditation
Stepan has achieved ISO 14001 accreditation for its Wesseling, Germany, manufacturing plant. ISO 14001 is the international standard that specifies a process for controlling and improving an organisation's environmental ...
Songwon announces global price increases for its range of Plastic Additives
Songwon Industrial, a leading developer and manufacturer of polymer additives, will increase global prices of its Songnox® antioxidants, Songlight® and Songsorb® UV stabilizers, Songstab acid scavengers as well as of its ...
 
 
 
 
 
PU NETWORKING AREA
         
 
Mr. sahin gupta - star impex (1-10 employees)
Dr. Ming Zhou - Spectra Analysis, Inc. (11-50 employees)
Mr. Edward Meyer - MEYER (11-50 employees)
Mr. naheed khan - Noble Chemicals Material LLC (1-10 employees)
Mr. Joe Li - Xuancheng Pentapur PU Co.,Ltd. (11-50 employees)
Mr. Steve Swales - Duemas Technology Limited (11-50 employees)
Mr. Kevin Thomas - Duemas Technology Ltd (11-50 employees)
Mr. ed d'hooghe - dow (10,001 or more employees)
Mr. Phil Maxwell - Invacare Corp. (1001-5000 employees)
Mr. Paul van der Pol - COIM (501-1000 employees)
Dr. Lee sung-il - LOOKSPOLY Co.,ltd (1-10 employees)
 
PU pre-insulated panel
We are the leading manufacturer of PU pre-insulated panel, our factory equiped with three continous ...
 
PU to Neoprene bonding
We are runniung a procees were we cast urethane (TDI 83 A Shore) in a mould and lay a strip of neoprene rubber, thats got primer on it, over it. The problem is that the rubber does not always stick to the urethane. Success rate is 65%. We want to achieve a 100% success rate in the ...
 
 
MY PU2PU
Update your Personal Info
Update your Company Info
Update your Product Info
Find The People You Need
Post Selling Opportunities
Post Request for Assistance
 
 
COMPANY ANNOUNCEMENTS
     
 
People PU2PU Full Access
Roger Stubbs appointed Vice President of Stepan
Roger Stubbs has been promoted to the position of Vice President – European Polymers for Stepan Company, effective immediately. Stubbs will continue to have profit and loss responsibility for the ...
Published on: Feb 23, 2010
Rigid Foams
New PU rigid foam insulated building blocks
Because of rising energy costs, the building materials industry is focusing increasingly on heat conductivity - the lower this value, the better the insulation will be. In a solid construction, a ...
Published on: Feb 23, 2010
Industry Update
Foam consolidated at Moorebank
A CRUCIAL manufacturing operation has been secured for Moorebank by the State Government. The $10 million project would provide five new jobs and ensure 64 existing ones continued, Minister for ...
Published on: Feb 22, 2010
Finished Products : Industrial
Transparent Polyurethane Hose features food-grade design
Made of heavy-duty polyurethane, Tigerflex(TM) Series 2020S(TM) features abrasion-resistant TPU liner that is permanently static dissipative and designed to operate in both humid and dry climates. ...
Published on: Feb 22, 2010
Industry Update
Sherwin-Williams to Acquire Sayerlack Coatings
The Sherwin-Williams Company has announced that it will acquire the Industrial Wood Coatings business of Arch Chemicals Inc.The signed agreement was announced Wednesday.Arch Industrial Wood Coatings, ...
Published on: Feb 19, 2010
Coatings
Morbark converts to urethane industrial coating
The exterior paint on Morbark equipment is changing. The company recently converted to Morthane, a two component urethane industrial topcoat with a two component urethane primer, for a complete ...
Published on: Feb 19, 2010
Finished Products : Medical
Molnlycke Health Care purchases Rynel
Molnlycke Health Care has completed the purchase of hydrophilic polyurethane foam specialist Rynel in a deal designed to support the group's wound care product offering.The medical products company ...
Published on: Feb 17, 2010
Finished Products : Rapid Prototyping
Moeller Design bought by 3D Systems
Moeller Designs has been acquired by 3D Systems Corp. of Rock Hill, S.C. for an undisclosed price.Seattle-based Moeller Designs is 21 years old and located at 620 S. Industrial Way. It provides ...
Published on: Feb 17, 2010
more ...
 
     
PATENTS
     
 
Foams PU2PU Full Access
Halogen-free, flame-retardant polyurethane foams with low scorch level
The present invention relates to halogen-free flame-retardant polyurethane foams with low scorch level which comprise, as flame retardant, a mixture composed of at least one polyaryl phosphate and of ...
Published on: Feb 19, 2010
Hot Melts Adhesives
Moisture-curing hotmelt adhesives comprising at least one silane-functional ...
The present invention relates to moisture-curing hotmelt adhesive compositions which comprise at least one silane-functional polyurethane prepolymer of the formula (I). The compositions have neither ...
Published on: Feb 19, 2010
Rigid Foams
Water-blown rigid foams for the insulation of liquefied natural gas tanks
The present invention relates to a rigid polyurethane foam comprising reinforcing materials which can be obtained by mixing (a) isocyanates which have a viscosity at 25.degree. C. of less than 500 ...
Published on: Feb 19, 2010
more ...
 
 
Get WEEKLY PU Trends with PU2PU FULL ACCESS
 
Copyright © PU2PU 2009 | The Polyurethane Newsletter - Issue 295 | Urethane Update - Issue 221 | Contact us
You are subscribed to the PU Newsletter mailing list. Click to your address. PU2PU comply with the CAN-SPAM Act of 2003. For more information, please read our PRIVACY POLICY. If you have any questions about subscription to this list, contact us at: