PU NEWSLETTER
 
 
 
Issue 297 - September 1, 2010
  Personal Information Company Information Product Information Selling Opportunities Request for Assistance
 
WHAT'S NEW IN THE PU COMMUNITY
         
 
A Renewable Resource HR Flexible Foam
Bayfit natural oil polyol (NOP) 633 High-Resiliency Modable Flexible Foam from BayOne Urethane Systems is made with 16 percent renewable resource content. NOPs are one of the building blocks of the Bayer MaterialScience sustainability program....

Company: BayOne Urethane Systems
Energy efficiency in Appliances a key feature at Polyurethanes 2010 ...
Advances in the development of blowing agents with low global warming potential (GWP) will be presented at this fall’s Polyurethanes 2010 Technical Conference.  Sponsored by Center for the Polyurethanes Industry (CPI), in partnership with ...

Company: The Center for the Polyurethanes Industry
BASF experts at “Husum WindEnergy” 2010
For the first time, BASF will showcase its current portfolio for manufacturers of wind energy plants at the “Husum WindEnergy” trade show. The offering includes products and solutions that allow efficient production and coating of rotor blades,...

Company: BASF
BaySystems™ announces new energywise™ Preferred Spray Foam Contractor for ...
BaySystems™, the global polyurethane systems business of Bayer MaterialScience, added a San Francisco spray polyurethane foam (SPF) applicator to its select list of energywise™ Preferred Contractors. SDI Insulation, Inc. located in Burlingame, ...

Company: BaySystems
High Performance TDI / Polyether Elastomers - Era Polymers
Erapol E Series is a range of polyether based prepolymers intended to be reacted with MOCA or Ethacure to produce high performance polyurethane elastomers in the hardness range of 83 Shore A up to 95 Shore A. The Erapol E Series of high ...

Company: Era Polymers Pty Ltd
RimCell RX Series - Gusmer Decker
Gusmer | Decker’s RimCell RX Series Metering and Dispensing Units are the system of choice for polyurethane processors who demand optimum performance and flexibility. It is designed to process any commercially available unfilled non-corrosive ...

Company: Graco
Cannon Afros
Welcome to Cannon Afros Division - A Thoroughbred Italian SuccessFounded in the early 60’s close to Milan (Italy), nowadays with more than 12,000 metering units installed, the Cannon Group is the world’s leading supplier of dosing systems, ...

Company: Afros
Antibacterial foam gasket – certified for air conditioning systems
Bacteria are everywhere – in the air, in the water, on the soil. Thus, the useless microbes don’t spread in buildings, clean rooms or in cars Rampf Giessharze has developed the antibacterial foam gasket Raku-Pur 32-3276, which is certified according to VDI 6022. The ...

Company: RAMPF-Gruppe
 
 
New technology for protective coatings and foam systems
SBS LLC has developed a new technology for producing polyurea on both the A-side and the B-side. Utilising special MDI and HDI prepolymer technology as well as epoxy modified amine resins, it can be used to make primary ...
Shell announces successful turnaround and debottlenecking at CSPCL, Nanhai
Shell Chemicals announced the successful first turnaround at the CSPCL – “Nanhai” petrochemicals joint venture complex in Guangdong, China. Nanhai is a 50:50 joint venture with China National Offshore Oil Company (CNOOC). ...
Gaco Western Names Pat Hatem Vice President of Operations
Gaco Western, manufacturer of the most technologically-advanced elastomeric coatings and polyurethane spray foam for the construction and waterproofing industries, announces that Pat Hatem will join the company as the new ...
 
 
 
 
 
PU NETWORKING AREA
         
 
Dr. massimo monchiero - TEC MAC SRL (11-50 employees)
Mr. Krzysztof Placzkiewicz - ORION (51-200 employees)
Mr. Arshad Hameed - Petrocm & Polymers Co. Mideast (Fze) (1-10 employees)
Mr. Chetan Dave - TATA TECHNOLOGIES LTD (1001-5000 employees)
Mr. YH Chen - SLM (51-200 employees)
Mr. Dave Powell - StopKick (1-10 employees)
- NEEDS: making microcellular polyurethane foam tyres for wheel barrows
- SPECIALTIES: none
- INTERESTS: microcellular polyurethane foam tyres
Mr. Jim Oberlender - Armstrong Mold (51-200 employees)
Mrs. Karin Naujoks - Bayer MaterialScience (10,001 or more employees)
Mrs. Muriel Comtat - Campi y Jove Export SL (1-10 employees)
Dr. Fyodor Shutov - F&D Innovative Composites Inc (1-10 employees)
Mrs. Angela Bostock - Dow (10,001 or more employees)
 
Molded PU Foam Products
We are looking for some niche markets to serve with our new machinery.  We are mainly ...
 
Looking for second hand low pressure polyurethane dispensor
I am looking for a second hand low pressure polyurethane dispensor working or not. 4g/sec-40g/sec.
 
 
MY PU2PU
Update your Personal Info
Update your Company Info
Update your Product Info
Find The People You Need
Post Selling Opportunities
Post Request for Assistance
 
 
COMPANY ANNOUNCEMENTS
     
 
CASE PU2PU Full Access
BASF announces FDA-compliant polyurethane raw materials
BASF’s Polyurethanes business in North America today announced an updated, FDA-compliant product list for the CASE (Coatings, Adhesives, Sealants and Elastomers) market. The following polyether ...
Published on: Aug 31, 2010
Textiles
Polyurethane upholstery fabrics are green option
With the rise of eco-friendly design, manmade materials have lagged in popularity in recent years. Yet such materials are now being made greener and are probably here to stay.Polyurethane is a ...
Published on: Aug 30, 2010
Finished Products : Belts
1 mm Pitch Timing PU Belts from SDP
Stock Drive Products announces a new series of 1 mm pitch polyurethane timing belts, designed for miniature applications and to run with the new 1 mm pitch timing belt pulleys. Offered with Kevlar® ...
Published on: Aug 30, 2010
Dispersions
PU dispersions using biobased technology
The industry has embraced the use of plastic parts in a wide range of applications. However, coating these plastic parts has always been a challenge to the industry. And the increasing use of ...
Published on: Aug 27, 2010
Industry Update
Dow Izolan will participate at Desma Open House
13-14 September 2010 Dow Izolan LLC and Dow Chemical will participate at Desma Open House (Achim, Germany). Desma is a world leader in footwear polyurethane injection technology.Dow Chemical will ...
Published on: Aug 26, 2010
People
Candelori leaves ACC’s Center for the Polyurethane Industry
After 16 years of working on behalf of various trade organisations, associated with the plastics and polyurethane industries, Neeva-Gayle Candelori, Director of the Center for the Polyurethanes ...
Published on: Aug 25, 2010
Coatings
Ferguson-Enterprises Repairs Water Main Leaks with Trenchless Underground Water Line ...
Known as cured-in-place-pipe (CIPP) lining, it is a practical, fast and economical "no dig," trenchless solution for underground water, waste and gas lines with partial structural deterioration ...
Published on: Aug 25, 2010
more ...
 
     
PATENTS
     
 
Composites PU2PU Full Access
Composite rail joint end post
An end post for a rail joint assembly comprising: a top portion having a profile substantially identical to cross-sectional shapes of rail head sections of first and second rails of the rail joint ...
Published on: Aug 26, 2010
Foams
Foam-forming system with reduced vapor pressure
An isocyanate-reactive composition containing a blowing agent that includes HFC 134a and water characterized by a vapor pressure which is lower than that of comparable compositions which do not ...
Published on: Aug 26, 2010
Raw Materials: Polyols
Polymer polyol, method for producing the same, and method for producing polyurethane ...
A polymer polyol (I) is provided that is formed of a polyol (A), polymer particles (B) obtained by polymerization of an ethylenically unsaturated compound (b), and an active-hydrogen-containing ...
Published on: Aug 19, 2010
more ...
 
 
TECHNICAL PAPERS
     
 
Molded Foams
Molded Polyurethane Foam Inserts for Protection and Insulation
Molded polyurethane foam has long been used to package components. Many design engineers, however, are not aware that properly formulated foam and carefully designed foamed parts can also be used for thermal management, acoustical insulation, ...
Published on: Aug 31, 2010
more ...
 
 
Get WEEKLY PU Trends with PU2PU FULL ACCESS
 
Copyright © PU2PU 2009 | The Polyurethane Newsletter - Issue 297 | Urethane Update - Issue 222 | Contact us
You are subscribed to the PU Newsletter mailing list. Click to your address. PU2PU comply with the CAN-SPAM Act of 2003. For more information, please read our PRIVACY POLICY. If you have any questions about subscription to this list, contact us at: