|
 |
| |
 |
| Having seemingly survived the worst financial crisis in our lifetimes it appears that the economy is stabilizing. While most forecasts predict markets will advance only slowly and unevenly in the near future its time to emerge from suvival-mode and s... |
| Company: Polyurethane Manufacturers Association |
|
|
|
|
 |
| The clean, new design gives www.polyurethane.org the same look and feel of the American Chemistry Council’s (ACC) main site, which makes it easier for visitors to access the resources of www.americanchemistry.com when they visit the Center for the Po... |
| Company: The Center for Polyurethanes Industry |
|
|
|
|
|
 |
| In many areas, it‘s impossible to imagine living without polyurethane. From car engines to sports facilities, from cables to adhesives - polyurethane applications are everywhere. The solutions we develop are as wide ranging as the industries in which we work. ... |
| Company: Stockmeier Urethanes |
|
 |
| Allrane resins have been used for more than 15 years in label doming to produce Spherinames. The Spheriname is a real communication tool. With Allrane resin, its resistant to tearing, abrasion and sunlights, and your label lasts much longer. Allrane resins for doming are born from the work of our Research and Development team with a validation of its properties by test of endurance before marketing. Wit... |
| Company: ALLRIM |
|
 |
| Simplify your molding line operations with the efficiency and dependability of Turntables from Linden Industries. Linden's Engineering Staff has many years of experience designing, engineering, and building the components necessary to run a cutting-edge Polyurethane processing plant. From very small and straightforward Turntables, to some of the most complex Turntables required for a modern Polyurethane plan... |
| Company: Linden Industries |
|
 |
| It is not enough to simply replace a combustion engine with a battery in order to arrive at a car with fully electric drive. It is more a matter of having to redesign almost all functional parts so that they comply with the generic “electric” term. And it is here that the desire for “energy saving” is also a driver for developme... |
| Company: BASF SE |
|
|
| |
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
Milan Zelenovic - Primus (11-50 employees)
- INTERESTS: Systems >> Coatings And Sprays >> Foam Systems >> Coatings And Sprays >> Lacquer Coatings Systems >> Coatings And Sp...
- SPECIALTIES: PU Components >> Additives >> Antifogging PU Components >> Additives >> Flame Retardant PU Components >> Additives >...
|
|
|
|
|
|
|
RMPA SRL - RMPA SRL -
- INTERESTS: POLYURETHANE
|
mehmet bayrak - baymel poliüretan -
- SPECIALTIES: System house manangment for footwear and rigid.
|
|
|
|
|
|
|
|
|
Peter Frohlich - Plastral Pty Ltd -
- SPECIALTIES: chemical specialty industry
|
Alessandro Baklagis - Ram Elettronica S.p.A. (11-50 employees)
- NEEDS: We are looking for agents, dealers and business partners worldwide for our automatic foam cutting machines.
|
|
|
David Cox - The Bradbury Co., Inc. (501-1000 employees)
- SPECIALTIES: Manufacturers of insulated metal panel lines, rollforming lines, coil processing lines, coil to coil embossing lines, st...
|
|
|
|
|
|
 |
| HIGH PRESSURE FOAMING MACHINE R.M.P.A High pressure machines are available with capacities from 80 gr to 3,5 Kg per second. These machines can be interfaced with automated systems such as carousels and rotating tables through manipulators and pouring robot... |
| Company: RMPA SRL |
|
|
|
|
|
|
|
|
|
| |
|
|
|
| SYSTEMS>> COATINGS AND SPRAYS>> POLYUREA SPRAYS |
 |
| CertainTeed Corp. announced that its CertaSpray Closed Cell Spray Polyurethane Foam Insulation has been approved for use in non-combustible commercial walls. The company recently passed the National Fire Protection Association 285 and 259 tests, which certify CertaSpray for use within non fire-rated wall assemblies of commercial non-combustible ... |
| Company: CertainTeed |
|
| Its official, the U.S. Army is using spray foam insulation to keep heat outside their tents. This comes as an effective solution on the excessive heat of U.S. Army tents located in Iraqi deserts. Temperatures in this Middle-East country could reach to a scorching 130 degrees Fahrenheit, so much for white soldiers to bear. In fact, even aircondition... |
| Company: RetroFoam |
|
| What began as a small technical tweak has morphed into a big headache for trucked shipments of coatings around North America. Swept up in a law of unintended consequences, coatings manufacturers are reporting “delays and difficulties” in product shipments, including drivers being ticketed, due to a recent change in the regulatory definition of a... |
| Company: The American Coatings Association |
|
| FINISHED PRODUCTS>> INDUSTRIAL>> HOSES & TUBING |
 |
| Masterflex AG starts 2012 with the development of an innovative new hose series for the field of PU suction and blower hoses, which, due to its accreditation of the DIN 5510-2 standard, is especially suitable for applications in railed vehicles. The new Master-PUR L/H MHR se hoses made from special polyurethane can be applied for ventilation i... |
| Company: Masterflex |
|
| SYSTEMS>> PRESSURIZED FOAMS |
 |
| Spit are continuing to add to their range with the introduction of their new B1 and B3 Expanding Polyurethane Foams, which improve on the previous foams that were available in the past. The B1 Foam is fire rated to EN1366 conformities by the Warrington Fire Institute, and provides 4 hours fire resistance without the requirement for over-capping... |
| Company: ITW Construction Products |
|
| This Industry Risk Ratings report from IBISWorld evaluates the inherent risks associated with the Urethane Foam Manufacturing in the US industry. Industry Risk is assumed to be the difficulty, or otherwise, of the business operating environment. The report looks at the operational risk associated with this industry. Three types of risk are recog... |
| Company: Companiesandmarkets.com |
|
| PU COMPONENTS>> CATALYSTS |
 |
| An object of the present invention is to provide a catalyst for producing a rigid polyurethane foam and an isocyanurate-modified rigid polyurethane foam excellent in storage stability in the case that water is contained as a blowing agent, and a raw material-blended composition using the same. In the present invention, a catalyst composition comprising the following amine compounds of (A... |
| Company: Tosoh Corporation |
|
| FINISHED PRODUCTS>> SPORTS>> GOLF |
 |
| Disclosed herein is a golf ball having improved cut and shear resistance. Such gold balls comprise a core, an inner cover layer, and an outer cover layer, the outer cover layer being formed from a polyurea or poly(urea-co-urethane) comprising: 1) a polyurea prepolymer comprising: the reaction product of at least one first polyisocyanate, wherein the polyisocyanate has a reactivity greate... |
| Company: Dow Global Technologies Inc |
|
| PU COMPONENTS>> PREPOLYMERS |
 |
| Stable NCO prepolymers are produced from polyisocyanates having a melting point greater than 70.degree. C., preferably, naphthalene diisocyanate, having advantageous physical properties. An important feature of the process of the present invention is the rapid cooling of the prepolymer. The process of the present invention may be carried out on a continuous or batch basis. The prepolymer... |
| Company: Bayer MaterialScience LLC |
|
| SYSTEMS>> COATINGS AND SPRAYS>> POLYUREA SPRAYS |
| This presentation provides an overview of the key trends and issues affecting the global spray foam industry, including comments on the interim ban affecting the use of PU materials in the Chinese construction industry, trends driving the US demand for low-pressure foam kits and the growing demand for one-component foams in aerosol cans. A more detailed review of the North American spray... |
| Company: PU Magazine International |
|
| |
| FINISHED PRODUCTS>> CONSTRUCTING>> PANELS |
 |
The pine needle composites using isocyanate prepolymer were evaluated for their dimensional stability, flammability characteristics, biological resistance, and thermoacoustic properties. The thickness swelling and linear expansion of the composite panels affected significantly under wet conditions. The optimum flammability characteristics of the pine needle fibers were obtained at the re... |
| Company: CSIR-Central Building Research Institute |
| PU COMPONENTS>> POLYOLS>> GREEN BASED POLYOLS |
 |
Two rapeseed-oil-based polyols were synthesized by partial epoxidation of the double bonds in fatty acid chains and overall opening oxirane rings by using diethylene glycol. Flexible polyurethane foams with varied isocyanate index and modified by partial substitution of petrochemical polyether triol with rapeseed-oil-derived polyols were obtained. Bio-polyols: Polyol I and Polyol II diff... |
| Company: Cracow University of Technology |
 |
In this paper we explore the preparation of polyurethanes from spinifex resin biopolymer. Polyurethanes were prepared by both one-shot and pre-polymer (two step) processes. Attenuated total reflection—Fourier transform infrared analysis revealed urethane bond formation in both processes, and the peak intensity for N–H stretching was more sharp when the network was prepared by the pre-pol... |
| Company: The University of Queensland |
|
| |
|
|
| |
|
Copyright © PU2PU 2012 | The Polyurethane Newsletter - Issue 375 | Urethane Update - Issue 301 | Contact us
|
| You are subscribed to the PU Newsletter mailing list. Click to your address. PU2PU comply with the CAN-SPAM Act of 2003. For more information, please read our PRIVACY POLICY. If you have any questions about subscription to this list, contact us at: |
|
|
|
|
