Switch to

Building with CO₂ technology to become possible (Source: Covestro)

18. February 2021

Covestro: Successful research into rigid PU foam with carbon dioxide

Since 2016, Covestro has been working with research and development partners as part of the "DreamResource" joint project (FKZ 033RC002) funded by the German Federal Ministry of Education and Research (BMBF) to research new, more environmentally friendly polyols with the potential to be used, for example, in the form of rigid polyurethane foam in insulation for the construction sector. An initial prototype of an insulation board has now been developed together with the project partner puren gmbh, which contains the novel polyols based on conventional ethylene oxides and CO₂. According to Covestro, this marks a decisive further development of its CO₂ technology for a particularly important part of the climate-relevant construction industry.

"Buildings are responsible for a large share of global energy consumption and greenhouse gas emissions. This makes it all the more important for us at Covestro to contribute to the Circular Economy and make insulation even more sustainable and efficient in the future. Our goal is to end the use of fossil fuels and make our production processes more sustainable," said Sucheta Govil, Chief Commercial Officer at Covestro.

Using its CO₂ technology, Covestro already produces the CO₂-based polyol cardyon, which is utilised in the manufacture of mattresses, sports flooring, textile fibres and components for vehicle interiors. The company has now succeeded in combining the petroleum derivative ethylene oxide with CO₂ in a chemical reaction to produce first polyols and finally rigid polyurethane foam. Up to 20 % of petroleum-based raw materials are expected to be replaced by this process in the future. "With the development of these materials, we are endowing the greenhouse gas CO₂ with a new use with versatile applications," said Dr. Christoph Gürtler, Head of Catalysis and Technology at Covestro.

Up to 20 % of crude oil-based raw materials in PU rigid foam insulation boards could be saved in the future with CO<sub>2</sub> technology. (Source: Covestro)Up to 20 % of crude oil-based raw materials in PU rigid foam insulation boards could be saved in the future with CO2 technology. (Source: Covestro)

Together with the industrial partners puren gmbh, Byk-Chemie GmbH and PSS Polymer Standard Service GmbH, it proved possible not only to investigate a wide range of applications but also to develop new analytical methods for the CO₂-based materials. With RWTH Aachen University and the Technical University of Berlin, the ecological and economic potential of this expanded CO₂ technology was investigated along with the in-depth characterisation of the novel materials. “The results of DreamResource very clearly demonstrate the diverse opportunities that arise from the use of CO₂ as a basic building block for polyols to produce a wide variety of polyurethane types. The interaction between industry and science plays an essential role in this innovative field," said Dennis Krämer, project manager for national and international research projects for CO₂ utilization at Dechema e. V.

"This renewed expansion of the product range yields enormous leeway," said Gürtler. Thanks to the promising combination of ethylene oxide and CO₂, surface-active substances can also be produced through this new route in addition to CO₂-based rigid polyurethane foam, which can be used in insulating boards for buildings, for example. Puren is one of the pioneers of rigid polyurethane foam technology and investigated the use of CO₂ polyols in the rigid foam segment in this research project. Following more than three years of joint research in the collaborative project, over 400 kg of the CO₂-based polyol was delivered to puren for further processing. “These initial rigid foam insulation boards made with a CO₂-based rigid foam polyol conform to standards and are already comparable with the market standard in terms of their key technical specifications. During further cooperation, we plan to manufacture additional prototypes and to enhance the properties with the aim of taking a giant step closer to the use of CO₂ as an alternative raw material in rigid foam insulation boards and ensuring rapid final development to market readiness," said puren Managing Director Dr. Andreas Huther. Thanks to this successful collaboration, CO₂ can now be used as an alternative raw material in the rigid foam sector. This will make building insulations even more sustainable and will further reduce the dependence on fossil raw materials, said Covestro.

www.bmbf.de · www.byk.com · www.covestro.com
www.puren.com · www.pss-polymer.com
www.rwth-aachen.de · www.tu.berlin

Write a comment on this article now