Huntsman has developed two new UV-protected TPU grades for offshore, oil and gas, and mining cables.
Polyurethanes

Huntsman develops UV-protected TPU grades

Huntsman has developed two UV-protected grades of thermoplastic polyurethanes (TPUs) for use in offshore, oil and gas, and mining wire and cable applications.

Clariant’s Exolit OP 560 was confirmed as a safer alternative to pentaBDE flame retardant for PU foam (Photo: Natural Foams Technology)
Polyurethanes

Clariant’s Exolit OP 560 confirmed as safer flame retardant for PU foam

Clariant has announced good news for the upholstery industry and other sectors looking for safer, environmentally more compatible flame retardants that meet internationally accepted flammability standards [3] for flexible polyurethane foam.

Polyurethanes

Chromaflo launches new inhibitor and thickener dispersions at Composites Europe 2014

Chromaflo Technologies, a global supplier of pigment and chemical dispersions for the thermoset and coating industries, announced the release of new thickening pastes and an inhibitor for the thermoset market in the EMEA region.

(Source: Mennekes)
PolyurethanesThermoplastic Elastomers

Mennekes chooses Irogran for electric car cable caps

The German manufacturer of industrial plugs and sockets Mennekes is using an Irogran TPU from Huntsman to improve the longevity of cables and connectors used to charge electric and plug-in hybrid vehicles.

Fig. 1: Official handover of two Frimo HP RTM dosing units at the TU Dresden Fig. 2: Example of a natural fibre pressing line Fig. 3: Forming and back injection moulding for organo sheets in one process step Fig. 4: Plant for the flexible processing of thermoplastic fibre-reinforced plastics Fig. 5: Street Shark 2.0 – Mission 400 Alzen Porsche
Polyurethanes

Frimo at Composites Europe 2014

From 7 – 9 October 2014, Frimo – together with cooperation partner Schuler – will be presenting a broad spectrum of manufacturing solutions as part of Composites Europe 2014 in Düsseldorf, Germany. In hall 8b, stand A45, Frimo will be showcasing for professional visitors its expertise ranging from the processing of thermoplastic organo sheets to RTM (epoxy or PU) through to natural fibre PP applications.

Dow wins 2014 CPI Innovation Award (f.l.t.r.): Alan Robinson and Juan Carlos Medina, both Dow
Polyurethanes

Dow oil recovery technology recognised with 2014 Polyurethane Innovation Award

Dow and Preferred Sands, LLC., were recognised with the 2014 Polyurethane Innovation Award at the annual Center for Polyurethanes Industry (CPI) conference in Dallas, TX, USA. Presented by CPI of the American Chemistry Council, this recognition represents the importance of collaboration to develop new technologies to help solve real-world challenges.

Carbon fibre-reinforced structural parts for the most innovative German vehicles are made using a dedicated Cannon fibre preformer The Cresim project generated industrial results: a satellite dish has been produced by assembling seven equal parts produced with Estrim LLD technology in a dedicated mould. With Estrim LLD technology the epoxy resin is deposited (uniformly and only where it is required) over the carbon reinforcement. The new InterWet 30 mixing head designed by Cannon Afros for high-output co-injection of polyurethane and glass fibres (InterWet process).
Polyurethanes

Cannon exhibits at Composites Europe 2014

The ninth edition of Composites Europe – trade fair and forum for composites, technology and applications – will take place in Düsseldorf, Germany, from 7 – 9 October 2014. The trade show has already been booked by 440 exhibitors and the attendance is expected in the area of 11,000 visitors.

Saip Contitech line Cedepa
Polyurethanes

JSC Panex starts producing sandwich panels with Saip Contitech technology showcased in Cedepa

JSC Panex, one of the leading industrial construction companies in Georgia, has chosen Saip for the supply of a full line for the continuous production of wall and roof sandwich panels. The project involves a Georgian financial found interested in the growing building and construction sector, where the request of energy-efficient construction materials is increasing.

Polyurethanes

Chromaflo offers six new colourants for in-plant tinting

Chromaflo Technologies, a global suppliers of colourant systems, chemical and pigment dispersions, has introduced six new economical colourants for in-plant tinting systems.

PolyurethanesThermoplastic Elastomers

TPUs for wire jacketing and cable accessory applications

Thermoplastic polyurethane experts from Huntsman are getting ready to exhibit at Wire China from 24 – 27 September 2014 at the Shanghai New International Expo Center (SNIEC) and create new connections across the Asian wire and cable industry.

Various Cannon spray mixing heads are available to apply different types of formulations, as in this example of sound deadening automotive element obtained by spraying a formulation containing up to 70 % of solid abrasive fillers. The new Manni 2.0 retrofitting kit allows for the conversion of existing polymerization presses in order to use the V.A.I. technology and improve up to 30 % the productivity of a sandwich panel’s foaming line.
Polyurethanes

Cannon exhibits at the CPI 2014 Polyurethanes Technical Conference

The 2014 edition of the North American event for polyurethanes professionals – CPI Polyurethanes Technical Conference – takes place this year in Dallas, TX, USA, from 22 – 24 September 2014. Cannon USA, manufacturers of polyurethane metering and mixing equipment in the USA since 1977, is present again at this important event.

Polyurethanes

PU materials – Efficiently filling in the gaps for sustainable buildings

Sustainable building design and construction requires insulation that fills unwanted gaps – helping improve energy efficiency. In residential homes, homeowners could save up to 20 % on monthly energy bills by adding insulation and sealing air leaks, according to the US Environmental Protection Agency’s Energy Star Program estimates.

Polyurethanes

Sustainable leather management

Lanxess has recently showcased its new technologies for a future-oriented leather production at the All China Leather Exhibition 2014 in Shanghai, China. The company presented sustainable solutions, which enable economic interest, ecological soundness and consumer benefits.

For many consumers, the ability to wash their pillows is a very desirable purchasing factor.
Polyurethanes

Washable memory foam pillows

One of the fastest growing products in consumer markets is memory foam bedding, especially pillows. Memory foam pillows cradle and support the head and neck, and many people attribute a better night’s sleep to the polyurethane-based pillows. This is especially true for individuals with back and neck problems. Unfortunately, the tiny, porous memory foam cells hold water long after a pillow is removed from the washing machine and hung to dry.

Roughguard XT is an industrial grade 100 % pure polyurea formulation that is “Engineered for the Vehicle Protection Market”
Polyurethanes

VersaFlex introduces 100 % pure polyurea vehicle protection/truck bedliner coating

VersaFlex Incorporated has launched Roughguard XT, a high performing vehicle protection coating/bed liner system. Roughguard XT is a field proven “industrial grade” 100 % pure polyurea system, “Engineered for the Vehicle Protection Market,” according to Rudi Rennert, West Coast Sales Representative for VersaFlex.

RimStar-series mixing and metering machines from KraussMaffei are ideally suited to processing epoxy resin, PU and polyamides. The machine has been adapted for the T-RTM process and the extremely low-viscous material used. The fibre-reinforced visible components for automotive construction, which were made using the surface RTM process, can be painted immediately and mass produced cost-effectively. The FiberForm process, a combination of injection moulding and thermoforming with composite sheets, enables multi-functional, lightweight structural components to be mass manufactured.
RubberPolyurethanes

Solutions for mass manufacturing lightweight fibre-reinforced components

KraussMaffei will present its range of solutions for manufacturing fibre-reinforced plastic (FRP) components at the Composites Europe trade show, from 7 – 9 October 2014 in Düsseldorf, Germany.

The Smart – DM 402 dispensing cell is a modular and flexible system with built-in safety technology which dispenses very accurately and safely. New AcoposMulti servo technology from B&R for the Smart – DM 402 dispensing cell with built-in safety technology New AcoposMulti servo technology from B&R for the Smart – DM 402 dispensing cell with built-in safety technology
Polyurethanes

Sonderhoff to present new Smart dispensing cell at Fakuma 2014

At the Fakuma trade fair from 14. – 18. October 2014 in Friedrichshafen, Germany, Sonderhoff Engineering will present the new Smart – DM 402 dispensing cell for gasketing, glueing and potting. According to the manufacturer, the dispensing cell has a new, more compact and fully modular design and is equipped with new built-in safety technology. With the help of standardised modules, the dispensing cell may now be adapted to different production concepts in a more flexible way.

Polyurethanes

Bayer launches Insqin solution for waterborne PU-coated fabrics

Bayer MaterialScience announced the launch of Insqin, a turnkey solution for a new generation of polyurethane-coated fabrics.

New generation Baulé Universal machine
Polyurethanes

Baulé to exhibit at Utech Asia/PU China 2014

The French company Baulé will highlight its new generations of TDI-ether-based and MDI-based systems as well as its machinery portfolio at Utech Asia/PU China 2014, stand N2-119.

The DR-CNC dispensing robot from Rampf Production Systems is an ideal solution for complex bonding, sealing, foaming, and casting requirements. All mixing and dispensing systems from Rampf Production Systems can be used with the DR-CNC.
Polyurethanes

Maximum flexibility for dynamic bonding

Live at Bondexpo – taking place from 6 – 9 October 2014 in Stuttgart, Germany – Rampf Production Systems will showcase its DR-CNC dispensing robot processing the fast-curing soft integral foam Raku-PUR Speed at stand 7501 in hall 7.

More news can be found in the Archive